PSC Hand Safety Insights · Europe

Find The Hand™ by PSC Hand Safety

Hand safety starts before the incident.

Why European industry needs to find hand exposure early — and design the hand out of mechanical tasks.

PSC Hand Safety · Blog For safety, operations and engineering teams in Europe · 7 min read
A worker’s hand rests on a steel coil held in a C-hook during lowering.
The hand as the control tool. The crane carries the weight; the hand steadies the coil. The exposure is already there — whether or not anyone is hurt today.

Across Europe, workers still use their hands to guide, position and control materials around hazards. Better gloves matter, but they cannot remove the exposure built into a task.

The next step is to find where the hand enters the work, understand the function it performs, and consider whether a hands-free method can take over.

Where was the hand, what was it doing — and why did the task require it to be there?

Before the injury

The exposure exists before the injury

A hand injury is often treated as an event: a pinch, a cut, a crush or a finger caught during a movement. But the conditions for that event can be present long before anyone is hurt. A worker reaches in to align a component. A hand steadies a load as it lands. Fingers retrieve a sling or guide material through a narrow gap. A hand becomes the control tool.

That moment may be routine. It may happen hundreds of times without an injury. Yet the hand is already exposed. If prevention begins only after an incident, the task has been allowed to keep placing hands in the hazard zone.

The useful question is not only “What happened?” It is also “Where was the hand, what was it doing, and why did the task require it to be there?”

Beyond PPE

Gloves are important — but they cannot change the task

Gloves have an essential role in protecting workers from hazards such as cuts, abrasion, heat and chemicals. Glove materials and designs continue to improve. Choosing the right glove for the task and ensuring it is worn correctly are important parts of a hand-safety programme.

But when a hand is still being used to guide, position or control material beside a moving load, pinch point or machine, the exposure remains. A glove may reduce some consequences, but it does not create distance or take the hand out of the control task.

This is why hand safety should look beyond PPE selection and examine how the work is performed.

A gloved hand holds a steel bar on a handling rack between the bar and its support.
Protected, but still exposed. The glove is right for the material. The hand is still between the bar and its support.
The distinction

A glove protects the hand. It does not create distance.

Across industries

The same hand-control tasks appear across European industry

Industries differ in their materials, machinery and processes, but many mechanical tasks are recognisably similar. Workers guide, align, hold, retrieve, separate and position objects.

Steel & metalsManufacturingConstructionUtilitiesLogisticsShipbuildingPortsMiningOil & gas

The surrounding hazards may include suspended or moving loads, pinch points between components, sharp edges, rotating equipment, awkward clearances and work at height. The specific control must fit the actual task and its full sequence: engagement, movement, positioning, release and retrieval. A solution that removes a hand from one phase should not create a new exposure in another.

The oilfield has long had to manage hands around loads and rigging. Hands-free methods let workers guide or control material from a safer distance. That practical principle can be examined wherever hands are still being used as a mechanical control tool.

Steel · construction · manufacturing · energy and marine

Hand safety in Europe, industry by industry

The tasks below are common across European operations. In each, the useful starting point is the same: name the function the hand is performing, then ask whether a suitable method could perform it from a safer distance. The answer differs by task — no single tool covers every load, clearance or hazard, and each method has to be checked against the real application.

GermanyBelgiumFrance

Steel and metals

What the hand does
Guides suspended coils and plates as they land, positions bars and sections on racks and tables, and retrieves slings and chains from under or between loads.
Exposure
Crush and pinch points between a landing load and its support; a load that swings or rotates; fingers under a sling as it is pulled free.
Hands-free direction
A push/pull or guiding tool to steer and position the load from outside its path; a hooked head to retrieve slings; an anti-tangle tagline where a line is the right way to control rotation in travel.
DenmarkGermany

Construction and major infrastructure

What the hand does
Steadies reinforcement, formwork and precast elements during crane placement; holds and positions lifting slings; aligns elements at the final set-down.
Exposure
Hands between a suspended element and fixed structure; lifting slings and tools at height. The Femern Belt project between Denmark and Germany made hands and fingers a specific safety focus, addressing glove selection, securing tools at height and lifting slings.
Hands-free direction
Tag lines and push/pull tools for guiding and final alignment, so that the hand is on a tool handle rather than on the element — selected for the element size, reach and site conditions.
ItalyNetherlandsFrance

Manufacturing and engineering

What the hand does
Aligns components for assembly or fixturing, feeds material into equipment, retrieves parts and offcuts, and holds work pieces near machinery.
Exposure
Pinch points between components and fixtures; closing or moving machine parts; sharp edges on parts being retrieved. Here the first answer is often a fixture, guard or change to the sequence rather than a hand tool.
Hands-free direction
Where a manual function remains, a purpose-designed reach, magnetic or holding tool — for example a magnetic head for ferrous parts, or a holder that keeps the hand away from a strike zone.
North SeaEuropean portsShipyards

Oil and gas, ports and shipbuilding

What the hand does
Guides suspended loads during lifting operations, controls rigging and slings, and positions pipe, blocks and materials on deck or quayside.
Exposure
Swinging loads in confined decks and quays; hands between pipe or blocks and fixed structure; wrapping or snagging of loose lines.
Hands-free direction
The oilfield has long managed hands around loads and rigging with push/pull tools and anti-tangle taglines. That practical principle — guide the load, keep the hand off it — transfers to ports and shipyards facing the same hand-control tasks.

Across all four, the method is the same and the tool is not: find the hand, name the function, then choose the control that performs that function in that task.

The evidence

Hand injuries in manufacturing and beyond: what the European evidence tells us

39.8%of reported non-fatal workplace accidents in the EU involved the upper extremities — hands grouped with arms and shoulders, not hands alone.Eurostat · 2023 · all activities
52.3%upper-extremity share of reported accidents in manufacturing — the highest among the sectors compared.Eurostat · 2023 · manufacturing
70+hand or finger injury incidents reported across the Femern Belt project; about half led to more than one day of absence.Femern A/S project data · Sept 2023
€7,851average estimated cost per hand-injury case, with much higher costs for severe injuries.AUVA study · Austria-specific estimate

The Eurostat figures do not isolate hand injuries and do not tell us what PPE workers were wearing. They do show why upper-extremity exposure deserves attention, particularly in sectors where people work directly with materials and equipment. Eurostat’s serious non-fatal accident data generally cover cases involving at least four full calendar days of absence, so they do not include every minor injury or near miss.

The Femern example makes the issue tangible. Its safety event addressed glove selection, securing tools at height and lifting slings. It recognises the value of these measures while raising a task-level question: how can workers avoid placing hands in the hazard zone during handling and control?

The Austrian figure is a national estimate, not a Europe-wide one — but it underlines that prevention matters to workers, employers and insurers alike.

After the incident — and before it

Why incident investigation alone is not enough

European workplaces already have a strong framework. Serious accidents are reported to national authorities and insurers and coded under Eurostat’s ESAW methodology. Investigations use methods such as 5 Whys, fishbone diagrams, fault trees and the French arbre des causes. Every employer keeps a written risk assessment — the Gefährdungsbeurteilung in Germany, the Document unique in France, the RI&E in the Netherlands — and the EU Framework Directive 89/391/EEC sets a clear order of prevention: eliminate the hazard first, protect the person last.

In Germany that order is taught as STOP: Substitution, Technical, Organisational, Personal. It is the right order. The difficulty with hand injuries is where the corrective action tends to land.

SSubstitutionChange the task so the hand is not needed
TTechnicalA tool, fixture or mechanism performs the hand’s function
OOrganisationalProcedure, reminder, retraining
PPersonalBetter gloves, more PPE
Where Find The Hand™ looks firstWhere corrective actions can stop if they focus only on retraining, reminders or PPE

Investigations can and do lead to substitution or technical measures. But when a root cause is written as “worker placed hand in line of fire”, the action can stop at retraining, a reminder or a better glove — the O and P of STOP. The task itself still requires someone to guide the load, so the hand goes back in. Find The Hand™ asks a different question: what was the hand doing there? Once the function is named — guiding, aligning, holding, retrieving — the search starts at the top of STOP: can the task change, or can a tool, fixture or mechanism perform that function from a safer distance? The right measure may be one of these, or a combination.

Two questions, both needed
Incident investigationFind The Hand™
When it startsAfter an injury or near missDuring normal work, before anyone is hurt
The questionWhy did this injury occur?Why does this exposure exist?
The focusThe event, its causes and contributing factorsThe hand’s position and the function it performs
Where it looks for the controlWherever the findings lead — from engineering changes to procedure and PPEFirst at substitution and technical measures that perform the hand’s function
Who can use itTrained investigators and safety teamsAnyone on a walk-round: three questions

“An investigation asks why an injury occurred. Find The Hand™ asks why the exposure exists — even when no injury has occurred. Both questions matter.”

Satish Agrawal, Managing Director, PSC Group

Find The Hand™ does not replace investigation, risk assessment or the legal duties behind them. It works with Europe’s own framework rather than against it. The Framework Directive already asks employers to eliminate hazards and prefer technical controls over personal protection; Find The Hand™ is a practical way to do exactly that for hand exposure — applied before the incident, not only after it.

One principle

Every crane, sling and shackle has a rated load. The hand has no SWL.

A different method

From protection to a no-touch method

A practical no-touch principle asks workers not to use their hands to control materials where a suitable tool or engineered method can perform that function. It is task-specific: it does not mean that every interaction with material can or should be eliminated. It means identifying the moments when a hand enters a hazard zone, and evaluating whether the task can be done from a safer distance.

01

Where does the hand enter the task?

02

What function is the hand performing?

03

Can a suitable tool, fixture or change in method perform that function instead?

The answer may be a hands-free tool, a redesigned fixture, a mechanical aid or a change to the work sequence. The control must be selected for the real application and checked for usability, reach, weight, visibility, clearance and release method.

A worker uses a long engineered push-pull tool to position a chain sling at a bundle of bars.
The same function, from a defined distance. An engineered push-pull tool positions the chain sling. The task still gets done; the hand stays on the tool handle.
Seeing is believing

See the change in practice

The “seeing is believing” video from JSW Steel Salem Works shows the principle at work. PSC safety tools take over the control function that workers’ hands would otherwise perform, so the task is guided from a safer distance. It moves the discussion from a general message about hand safety to a visible example of a different method. The video comes from an Indian steel plant; it is shared here because the tasks it shows — guiding loads, retrieving slings, handling ferrous material — are the same tasks European steel and metals operations perform every day. It is not a European customer case.

A suspended header assembly guided by a yellow anti-tangle tagline, the worker standing behind the barrier tape.

JSW Steel Salem Works · Seeing is believing

Video: JSW Steel Salem Works · Watch on YouTube

Our thanks to JSW Steel Salem Works for preparing such a useful practical demonstration, and for helping illustrate what hands-off working can look like in real steel-plant activities.

PSC solutions featured in the video:

PSC Load-It® M HeadPSC LoadGuider® Push/Pull ToolPSC Tubular GuiderPSC LoadGuider® Anti-Tangle TaglinePSC Load-It® MagHead ToolPSC Chisel & Punch Holder

Where does the hand enter the hazard — and can the same task be performed while keeping the hand farther away?

This question can be applied across steelmaking, rolling mills, material handling, maintenance, logistics, utilities and shutdown activities.

The point is not simply to place a tool in a worker’s hand. It is to examine the task, identify the exposure and select a method that performs the required function without putting the hand in the hazard zone. The tool must suit the application, and workers must be able to use it effectively in the conditions where the task actually takes place.

09 · Find The Hand™

Start with the task.

Not the tool.

  1. Find The Hand™

    Where is the hand?

    Identify where the hand or body enters the hazard during the normal task.

  2. Find the Function

    Why is it there?

    Guiding, positioning, aligning or controlling — name what the hand is actually doing.

  3. Engineer the Hand Out of the Hazard™

    How else can it be done?

    Select a hands-free method that performs the same function from a safer distance.

The 45-minute Find The Hand™ webinarFind The Hand™ → Find the Function → Engineer the Hand Out of the Hazard™
Working with European teams

A 45-minute Find The Hand™ webinar for European teams

PSC conducts a 45-minute Find The Hand™ webinar to help customer teams recognise where hands are exposed during mechanical tasks. The session looks at what the hands are being asked to do — guiding, positioning, aligning or controlling — and how hands-free methods may perform that function from a safer distance.

PSC has conducted webinars for customers in Serbia, Belgium and France, and works with customers in Germany, the Netherlands, Italy, France and other European markets. Sessions can be scheduled between 10:00 and 18:00 India Standard Time, subject to coordination across time zones.

Start with photographs of the task

A customer can begin by sharing photographs that show the task, the material, the equipment and the surrounding work area. These images support an initial remote review of where hands enter the operation and what they are doing. Where photographs do not show enough detail, PSC can discuss whether a short video or a more detailed assessment would help. Any recommendation depends on the application information available.

A useful set of photographs captures the task before, during and after the hand-control step, including how the material is released and how tools or lifting accessories are retrieved. The full sequence matters, because exposure can move from one phase to another.

Sourcing hands-free tools in Europe: the United States or India

European customers have often sourced hands-free tools from suppliers in the United States. PSC offers an additional option: tools manufactured in India, with support to discuss the task, identify a suitable product and arrange shipment — through FedEx or the customer’s own freight forwarder, depending on the order and destination.

India-made tools can be a more cost-effective option. The fair way to judge that is like for like: the same task, a comparable specification, and the total delivered cost — product price plus freight, duties, taxes and any other applicable charges — rather than the product price alone. PSC can prepare a delivered quotation so the comparison can be made on the customer’s own numbers.

Price is one factor. The right choice still rests on application suitability, specifications, usability and the evidence available for the task. Country of manufacture alone does not determine whether a tool is suitable.

Find the exposure before the incident

Gloves remain part of protection. But they cannot remove exposure when the method still depends on hands in the hazard zone.

PSC Hand Safety · Find The Hand™

Where does the hand enter your task?

Share photographs of a task for a remote review — or arrange a 45-minute Find The Hand™ webinar for your team.

sales@pschandsafety.com · www.pschandsafety.com

Read the methodology: Find The Hand™ by PSC Hand Safety

Sources and data notes
  1. Eurostat, Accidents at work — statistics by economic activity, EU, 2023 (upper-extremity and manufacturing shares).
  2. Eurostat, Accidents at work claimed 3 298 lives in the EU in 2023 (2023 non-fatal accident total).
  3. Eurostat dataset hsw_n2_06, Accidents at work by NACE Rev. 2 activity and part of body injured.
  4. Femern A/S, Safety in focus: Hands and fingers, 29 September 2023.
  5. AUVA cost calculation study, Prevention of Occupational Injuries Related to Hands (2015).

Photographs are from PSC field assessments; identifying details have been obscured.